Mid:Com 8000 Computer & Register The Computer Compact—only 12" x 5" x 8" (500 cubic inches) Accurate—measurements in 1/100 increments (either standard or metric units) New Printer—prints up to 5 parts on NCR or carbon-paper copies Easy Operation—4-line display directs next procedure to operator, plus quick entry of all pricing and volume amounts. The Register Cast aluminum housing—8½" x 8½" x 9" "Smart Head" provides optional Temperature Volume Compensator to automatically adjust for temperature changes Preset deliveries are controlled by a two-stage solenoid valve or optional electro-mechanical actuator

Cabinet Models Series 300 and 700 Cabinet models are available as either suction pumps or remote dispensers. A submersible pump is required with remote dispensers. The cabinets feature sturdy steel construction in a rugged design. Series 300 cabinet models, available as pumps or dispensers, have capabilities in single or dual hose configurations and are equipped with electric solenoid shut-off valves. Series 700 cabinet models, available only as pumps, are rated up to 12 GPM (45 l./min.) and are equipped with Series 800 meters. At the top of the Fill-Rite line are "resale accurate" Elite 300 and 700 cabinet models. Available as pumps or dispensers, Elite models have improved metering accuracy. A four-piston positive displacement meter and air separator replace Fill-Rite's Series 800 or 900 meter. Accuracy is improved to .259% to meet "Weights and Measures" specifications.

Flow Meters Series 800 & 900 Flow Master Digital Series 810 Flow Meters Series 800 & 900 Fill-Rite meters provide precision and durability in a cost-effective design. Both measure fluids at temperatures up to 150ºF (63ºC) and pressured up to 50 PSI (3.4 bars). The Series 800 meter is accurate to within ±1% at 5 to 20 GPM (19 to 76 l./min.). The easily reset register indicated product use up to 100 gallons or 1000 liters. A master totalizer shows cumulative totals to 100,000 gallons or liters. The Series 900 meter operates at 6 to 40 GPM (23 to 151 l./min.), with accuracy of ±2%. The easily reset register indicates products use up to 1000 gallons or 10,000 liters. The master totalizer registers up to 1,000,000 gallons/liters. Large, easy-to-read numbers Quick reset knob Flexible installation—flow ports position vertically or horizontally Flow Meter Digital Series 810 A combination of old-fashioned convenience and modern technology. Its compact, durable design, fingertip calibration and control, and unparalleled accuracy meet the demands of the chemical handling industry. The 810 can be used for bulk chemicals, herbicides, and a wide range of other liquids. Can be field calibrated in pints, quarts, liters, U.S. gallons, or Imperial gallons Accurate to ±0.2% at the point of calibration for field conditions LCD (Liquid Crystal Display) Internally protected against data loss during operation Five 1" NPT inlet/outlet ports for installation flexibility Easily assembled/disassembled with a Phillips screwdriver Glass-filled polypropylene and stainless steel body Powered by two (2) standard AAA batteries (included)

AC Utility Pumps—High Flow Series 300 With a flow rate few pumps can match, these pumps provide long life and deliver up to 30 GPM (114 l./min.). Explosion-proof UL-listed dual voltage ¾ HP motor (115 and 220/240V AC-60Hz) Motor has sealed bearings, heavy-duty switch, and thermal overload protection Built-in junction box Cast iron pump housing with bronze rotor and carbon vanes Check valve, pressure relief valves and strainer assembly Automatic bypass valve 15 ft. (4.6 m.) hose with static ground wire Manual nozzle "Easy-mount" 2 in. tank adapter Pump may be padlocked

DC Pumps (Battery Powered) Series 1200 12 Volt This industry standard DC pump dispenses up to 12 GPM (46 l./min.). The pump weighs less than 27 pounds (12.2 kg.) with hose and nozzle, and has a draw that's easy on the DC power source—a mere 18-20 amps. Explosion-proof, UL-listed ¼ HP motor with permanent magnet and ball bearings Heavy-duty switch, thermal overload protection, and junction box. Heavy-duty 3-wire battery cable Automatic bypass valve Built-in check valve and strainer 12 ft. (3.7 m.) hose with static ground wire Manual nozzle with holder that protects against dirt and contamination 2 in. base for tank openings Telescoping steel suction pipe from 22" to 40" (56 cm. to 102 cm.) Pump may be padlocked

Piston Hand Pumps Series 5200 This compact, high flow dual-action design delivers up to 20 gallons (76 l.) per 100 strokes. Lightweight and portable, with a variety of options, these pumps meet a full range of applications. Ideal for gasoline, oil, or a wide variety of approved liquids. Lightweight cast aluminum Stainless steel inner liner Reversible pump flow "Easy-mount" 2 in. tank adapter Telescoping suction pipe extends from 22" to 40" (56 cm. to 102 cm.) Anti-siphoning device Pump may be padlocked

LectroCount3 On-Board Truck Computer Give your drivers and yourself absolute command and control of your trucks on the road from the time they leave the plant to when they return. LectroCount3 is weights and measures approved and is available in either single or dual meter truck systems with multiple product programming. The basic LectroCount3 is a state-of-the-art, microprocessor-based system that is menu driven and offers a wide variety of customer selectable delivery, print, and system options. LectroCount3 is totally driver-friendly and eliminates manual posting, invoicing, and handwritten driver reports. Compact, modular design offers unmatched mounting flexibility for maximum space utilization. LectroCount3 is compatible with previous LectroCount™ systems and host computer interface software. Built-in self-diagnostics monitor and record all critical system functions—assists and expedites problem solving.